IGF Manways with Dome Covers
 
IGF manways are of the Type II construction (mat - woven). Dome covers were designed utilizing Finite Element Analysis.
Resin: Manways are stocked in Ashland Hetron 922, both MEKP and BPO DMA cure. We also have a large inventory of Derakane D470 and ISO manways. Other resins are available upon request.
110 mil Corrosion Liner: C-Veil+Nexus+2 Mat. All D470 and BPO manways are all double nexus construction.
PE stamped Calculations offered upon request.
Download Datasheet
Name Length Inside
Dia		 Outside
Dia		 Wall
Thick		 Flange Hole
Size		 Number
Bolts		 Spot
Faced		 Bolt
Circle		 Hub
Thick		 Hub
Length		 Dome
Thick
20.0 Side 30 PSI 12.000 20.000 27.500 0.375 1.125 0.750 20 Yes 25.000 0.563 4.500 0.375
24.0 Side 30 PSI 12.000 24.000 32.000 0.375 1 .250 0.750 20 Yes 29.500 0.625 5.000 0.375
24.0 Side 20 PSI 12.000 24.000 32.000 0.375 1.125 0.750 20 Yes 29.500 0.563 4.500 0.375
24.0 Side 10 PSI 12.000 24.000 32.000 0.250 0.750 0.750 20 Yes 29.500 0.375 3.000 0.250
24.0 Top .5 PSI 12.000 24.000 32.000 0.188 0.375 0.500 20 Yes 29.500 0.188 1.500 0.188
30.0 Side 25 PSI 12.000 30.000 38.000 0.375 1 .250 0.750 28 Yes 36.000 0.625 5.000 0.500
This information is provided as a guide to the use and application of IGF Flanges and is not or does not represent a specific warranty of the product or its performance.
Contact Us: 7660 Cottonwood Road PO Box 2477 Harrison, Arkansas 72602 Phone: 870-741-6500 Fax: 870-741-6512 |
 
Home | Custom Fabrication | Grating | Flanges | Manways | Couplings | Bell Couplings | Elbows | About Us | Contact Us